LG Dryer error codes

The codes people search for most, what each one means and what to check first. Tap a code for causes and step-by-step checks.

CodeWhat it means
d90
d75, d80, d95, Flow Sense
Vent blockage warning (Flow Sense)
The dryer's Flow Sense system found that air cannot flow freely out the exhaust vent. The number is roughly how restricted the vent is: d75 about 75%, d80 about 80%, d90 about 90% and d95 about 95%. On LG gas dryers, a d80 can also point to not enough gas reaching the dryer.
nP
NP
No power to heater
The electric dryer is not getting power to its heating element, so it tumbles but will not heat. It is usually a household power or wiring issue.
tE1
tE3
Temperature sensor error
One of the dryer's temperature sensors (thermistors) is giving a reading outside the normal range. Without accurate readings the dryer stops to stay safe.
dE
d E
Door open error
The dryer thinks the door is not fully closed, so it will not start or it stops mid-cycle.
F0
FO
Lint filter not in place
The dryer detected that the lint filter is missing or not seated correctly, so it will not run.
gASNo gas supply (gas dryers)
On LG gas dryers, this code means the dryer is not receiving gas, so it cannot heat.
HSMoisture sensor error
The dryer's humidity (moisture) sensor is not working correctly, so it cannot judge when clothes are dry. Sensor-dry cycles may end too early or run too long.
PFPower failure
The dryer lost power during a cycle, for example during an outage, and stopped.
PSPower supply error
The dryer detected incorrect voltage coming in. LG says it is usually caused by the power cord wires being connected wrong at the dryer's terminal block.
tE2Temperature sensor error (cold conditions)
A dryer temperature sensor is reporting a problem that LG links to cold conditions, such as a dryer in an unheated garage. It can also appear when the sensor itself is faulty.

LG Dryer repair in Orlando

$79.00 diagnostic, credited toward the repair. A 2-hour arrival window and a 90-day warranty.

Book a repair →