A dryer that takes two cycles is not just annoying — it is burning electricity and, if the cause is a blocked vent, it is a fire risk. Dryer fires are one of the most common appliance fires in US homes and lint is the fuel. Half the "no heat" and "takes too long" calls we run in Orlando end with a vent clean as well as a part.
Flat-rate, quoted before work starts.
We repair electric and gas dryers of every major brand: heating elements and thermal fuses, gas igniters and flame sensors, drum rollers, belts, idler pulleys, thermostats, moisture sensors and control boards.
What the symptom usually means, from the technicians who see it every week.
Burnt heating element or blown thermal fuse (electric), failed igniter or flame sensor (gas), or a tripped high-limit thermostat — which itself points to restricted airflow.
Lint-blocked vent run, crushed flex duct behind the dryer, failed moisture sensor, or a heating element that is only partly working.
Snapped drive belt, seized drum roller, failed idler pulley or a motor that hums but will not start.
Worn drum rollers or glides, a failing idler pulley bearing, or an object caught in the blower wheel.
Lint on the heating element or in the blower housing, a slipping belt, or a motor overheating. Stop using the dryer until it is inspected.
Flat-rate by the job, quoted before work starts. Totals below are typical all-in prices after your $79.00 diagnostic is credited back in full; the exact part for your model may differ slightly. Plus Florida sales tax on repairs that include a part (6.5% in Orange County); labor-only repairs are not taxed.
| Repair | Parts | Labor | Typical all-in | Warranty |
|---|---|---|---|---|
| Drum rollers, belt and pulley | $57.35 | $256.50 | $234.85 after $79.00 credit | 90 days |
| Gas igniter / flame sensor | $80.60 | $202.50 | $204.10 after $79.00 credit | 90 days |
| Heating element and thermal fuse | $71.30 | $216.00 | $208.30 after $79.00 credit | 90 days |
| Thermostat / cycling thermostat | $37.20 | $175.50 | $133.70 after $79.00 credit | 90 days |
Decline the quote and the $79.00 diagnostic is all you pay. Second appliance inspected on the same visit: $49.00.
Dryers are simple machines and almost always worth repairing. Elements, fuses, igniters, belts and rollers are inexpensive parts; the labor is the visit. Only a failed motor or control board on a dryer over 12 years old tips the math toward replacement.
Pick the dryer, the symptom and a morning, midday, afternoon or evening slot. Confirmed instantly, 24/7 — and the evening before, we text you a 2-hour arrival window.
You get a text with the tech's name and a live map when they're on the way, with an arrival estimate.
Flat-rate quote on your phone with the $79.00 diagnostic already credited. Most repairs finish the same visit.
Very often the vent. A long or crushed vent run trips the thermal fuse, and once it blows the dryer runs cold until the fuse is replaced and the airflow problem is fixed. We do both in the same visit.
Yes — a full vent clean and airflow test is on our price book, and we recommend it whenever a dryer is repaired for heat or drying-time problems.
Yes. Igniters, flame sensors, gas valve coils and thermostats on gas dryers are all same-visit repairs.
Pick a slot online, get a 2-hour arrival window the evening before, a flat-rate quote on site, and your $79.00 diagnostic comes off the bill.
Book a repair →