Samsung Oven / Range · Code C-d1

Samsung Oven / Range C-d1 code: Door lock error

The oven door lock is not in the position the control expects, usually around a self-clean cycle. The oven may refuse to lock or unlock.

Most common causes

  1. Door lock motor or switch failure
  2. Loose door lock wiring
  3. Something keeping the door from closing fully
  4. Control board fault

What you can safely check yourself

  1. Make sure the oven door closes fully and nothing is caught in it.
  2. Turn the oven off and restart; if it persists, switch off the range's breaker for 30 seconds, then restore power.
  3. If the door is locked after self-clean, let the oven cool completely before trying again. Never force the door.

Unplug the appliance before moving or cleaning anything. Do not open panels, touch gas connections or bypass safety switches.

Checked against: manualslib.com · manualslib.com · searspartsdirect.com. Meanings can vary by model; check your owner’s manual.

Quick answers

What does C-d1 mean on a Samsung Oven / Range?

The oven door lock is not in the position the control expects, usually around a self-clean cycle. The oven may refuse to lock or unlock.

Can I clear the C-d1 code myself?

Try these first: Make sure the oven door closes fully and nothing is caught in it. Turn the oven off and restart; if it persists, switch off the range's breaker for 30 seconds, then restore power. If the door is locked after self-clean, let the oven cool completely before trying again. Never force the door. Call a technician if the code returns or the door stays locked after the oven is cool; the door lock assembly likely needs replacement.

How much does it cost to fix a C-d1 code?

It depends on the cause. At FixPro the diagnostic visit is $79.00 and is credited in full to the repair; you get a flat-rate quote before any work starts.

Other Samsung Oven / Range codes

C-20 · Oven temperature sensor errorC-21 · Oven overheating / sensor shortC-d0 · Stuck control keySE · Shorted or stuck keypad-dC- · Oven divider (partition) errorC-24 · Oven heating too fastC-F0 · Control communication errordoor · Door not closedtESt · Demo mode

Still showing the code?

A FixPro technician will find the cause and give you a flat price. $79.00 diagnostic, credited toward the repair.

Book a repair →