KitchenAid Dishwasher F6E1 code: Control panel communication error
On current models this points to a problem between the control panel and the main control. On some older models the same flash pattern meant the dishwasher was not filling with water.
Most common causes
- Control glitch after a power interruption
- Loose wiring between control panel and main control
- Water supply off (older models)
What you can safely check yourself
- Reset the control: unplug the dishwasher (or switch off its breaker if it is hard-wired) for 30 seconds, then restore power.
- Make sure the water valve to the dishwasher is open.
Unplug the appliance before moving or cleaning anything. Do not open panels, touch gas connections or bypass safety switches.
Checked against: producthelp.kitchenaid.com · searspartsdirect.com. Meanings can vary by model; check your owner’s manual.