KitchenAid Dishwasher All lights blinking code: Cycle paused (door opened)
When all cycle and option lights flash together, the cycle has been suspended, usually because the door was opened mid-cycle. It is a status message, not a fault.
Most common causes
- Door opened during a cycle
- Door not latched fully
- Control glitch
What you can safely check yourself
- Close the door firmly until it latches; the cycle should resume.
- Reset the control: unplug the dishwasher (or switch off its breaker if it is hard-wired) for 30 seconds, then restore power.
Unplug the appliance before moving or cleaning anything. Do not open panels, touch gas connections or bypass safety switches.
Checked against: producthelp.kitchenaid.com. Meanings can vary by model; check your owner’s manual.