LG Dishwasher · Code LE

LG Dishwasher LE code: Wash motor error

The main wash motor is not running normally, so water is not being sprayed through the dishes.

Most common causes

  1. Food debris or broken glass jamming the pump
  2. Failed wash motor
  3. Loose motor wiring
  4. Control board fault

What you can safely check yourself

  1. Clean the filter and look for broken glass or debris in the sump
  2. Turn the breaker off for about 30 seconds and back on, then restart

Unplug the appliance before moving or cleaning anything. Do not open panels, touch gas connections or bypass safety switches.

Checked against: lg.com. Meanings can vary by model; check your owner’s manual.

Quick answers

What does LE mean on a LG Dishwasher?

The main wash motor is not running normally, so water is not being sprayed through the dishes.

Can I clear the LE code myself?

Try these first: Clean the filter and look for broken glass or debris in the sump Turn the breaker off for about 30 seconds and back on, then restart Call a technician if LE shows again; LG recommends service for this code.

How much does it cost to fix a LE code?

It depends on the cause. At FixPro the diagnostic visit is $79.00 and is credited in full to the repair; you get a flat-rate quote before any work starts.

Other LG Dishwasher codes

AE · Leak detectedIE · Water fill errorOE · Drain errorbE · Too many sudsCL · Control lock onFE · Overfill errorHE · Heater errornE · Spray pump (vario) errortE · Temperature sensor error

Still showing the code?

A FixPro technician will find the cause and give you a flat price. $79.00 diagnostic, credited toward the repair.

Book a repair →