GE Dishwasher · Code FTD / F56

GE Dishwasher FTD code: Failure to drain

The dishwasher could not drain the water out of the tub. This code appears on newer GE displays.

Most common causes

  1. Kinked or clogged drain hose
  2. Clogged sink air gap
  3. Clogged garbage disposal inlet or knockout plug still in place
  4. Clogged filter or failed drain pump

What you can safely check yourself

  1. Check the drain hose under the sink for kinks.
  2. Clean the air gap and run the garbage disposal.
  3. Clean the dishwasher filter.

Unplug the appliance before moving or cleaning anything. Do not open panels, touch gas connections or bypass safety switches.

Checked against: products.geappliances.com. Meanings can vary by model; check your owner’s manual.

Quick answers

What does FTD mean on a GE Dishwasher?

The dishwasher could not drain the water out of the tub. This code appears on newer GE displays.

Can I clear the FTD code myself?

Try these first: Check the drain hose under the sink for kinks. Clean the air gap and run the garbage disposal. Clean the dishwasher filter. Call a technician if the drain path is clear and the dishwasher still won't drain.

How much does it cost to fix a FTD code?

It depends on the cause. At FixPro the diagnostic visit is $79.00 and is credited in full to the repair; you get a flat-rate quote before any work starts.

Other GE Dishwasher codes

C1 · Slow drainC2 · Drain blockedH2O · Low or no waterC3 · Will not drainC4 · Float switch stuckC5 · Pump-out time too shortC6 · Water too coldC7 · Temperature sensor circuit faultC8 · Detergent cup blockedPF · Power failure

Still showing the code?

A FixPro technician will find the cause and give you a flat price. $79.00 diagnostic, credited toward the repair.

Book a repair →