GE Dishwasher · Code C1

GE Dishwasher C1 code: Slow drain

The dishwasher took longer than expected (about two minutes) to pump the water out during a drain. Water is leaving, but something is slowing it down.

Most common causes

  1. Partly clogged drain hose or sink air gap
  2. Food buildup in the garbage disposal the dishwasher drains into
  3. Kinked or sagging drain hose
  4. Debris in the drain pump or drain valve

What you can safely check yourself

  1. Run the garbage disposal to clear the shared drain line.
  2. Clean the air gap on the sink deck, if you have one.
  3. Check under the sink that the drain hose isn't kinked or pinched.
  4. Clean the dishwasher filter and the sump area at the bottom of the tub.

Unplug the appliance before moving or cleaning anything. Do not open panels, touch gas connections or bypass safety switches.

Checked against: products.geappliances.com. Meanings can vary by model; check your owner’s manual.

Quick answers

What does C1 mean on a GE Dishwasher?

The dishwasher took longer than expected (about two minutes) to pump the water out during a drain. Water is leaving, but something is slowing it down.

Can I clear the C1 code myself?

Try these first: Run the garbage disposal to clear the shared drain line. Clean the air gap on the sink deck, if you have one. Check under the sink that the drain hose isn't kinked or pinched. Clean the dishwasher filter and the sump area at the bottom of the tub. Call a technician if the drain path is clear and C1 keeps coming back. The drain pump or drain valve may need service.

How much does it cost to fix a C1 code?

It depends on the cause. At FixPro the diagnostic visit is $79.00 and is credited in full to the repair; you get a flat-rate quote before any work starts.

Other GE Dishwasher codes

C2 · Drain blockedH2O · Low or no waterC3 · Will not drainC4 · Float switch stuckC5 · Pump-out time too shortC6 · Water too coldC7 · Temperature sensor circuit faultC8 · Detergent cup blockedFTD · Failure to drainPF · Power failure

Still showing the code?

A FixPro technician will find the cause and give you a flat price. $79.00 diagnostic, credited toward the repair.

Book a repair →