Frigidaire Washer E35 code: Overfill (front-load)
On Frigidaire front-load washers, E35 means the water level sensor detected too much water in the tub.
Most common causes
- Water inlet valve not shutting off
- Faulty water level (pressure) sensor
- Damaged wiring
- Control board fault
What you can safely check yourself
- If the washer is really overfilling, turn off both faucets behind it right away.
- Unplug the washer.
- Don't use the washer until it has been checked.
Unplug the appliance before moving or cleaning anything. Do not open panels, touch gas connections or bypass safety switches.
Checked against: searspartsdirect.com · appliancepartspros.com. Meanings can vary by model; check your owner’s manual.