Frigidaire Washer · Code E3

Frigidaire Washer E3 code: Lid open or lid lock failed (top-load)

On Frigidaire top-load washers, E3 means the lid is open or the lid lock didn't engage.

Most common causes

  1. Lid not fully closed
  2. Washer not level
  3. Failed lid lock
  4. Control board fault

What you can safely check yourself

  1. Close the lid firmly.
  2. Check that the washer is level and adjust the legs if needed.
  3. Restart the cycle.

Unplug the appliance before moving or cleaning anything. Do not open panels, touch gas connections or bypass safety switches.

Checked against: owner.frigidaire.com. Meanings can vary by model; check your owner’s manual.

Quick answers

What does E3 mean on a Frigidaire Washer?

On Frigidaire top-load washers, E3 means the lid is open or the lid lock didn't engage.

Can I clear the E3 code myself?

Try these first: Close the lid firmly. Check that the washer is level and adjust the legs if needed. Restart the cycle. If the lid is closed and the washer is level but it still won't lock, the lid lock or control board may need to be replaced. Call for service.

How much does it cost to fix a E3 code?

It depends on the cause. At FixPro the diagnostic visit is $79.00 and is credited in full to the repair; you get a flat-rate quote before any work starts.

Other Frigidaire Washer codes

E1 · Slow fill or no water (top-load)E2 · Slow drain (top-load)E21 · Slow drain (front-load)E41 · Door open (front-load)E4 · Out of balance (top-load)E5 · Washer not level (top-load)E11 · Fill time too long (front-load)E35 · Overfill (front-load)

Still showing the code?

A FixPro technician will find the cause and give you a flat price. $79.00 diagnostic, credited toward the repair.

Book a repair →