Bosch Dishwasher · Code E22 / E9240

Bosch Dishwasher E22 code: Filter blocked

The filter at the bottom of the dishwasher is clogged, which limits how well water circulates and drains.

Most common causes

  1. Food debris packed in the filter
  2. Filter not cleaned regularly
  3. Filter not seated correctly

What you can safely check yourself

  1. Remove the filter and wash it under running water with mild soap and a soft brush.
  2. Reinstall it so it locks in place.
  3. Scrape large food scraps off dishes before loading.

Unplug the appliance before moving or cleaning anything. Do not open panels, touch gas connections or bypass safety switches.

Checked against: bosch-home.com. Meanings can vary by model; check your owner’s manual.

Quick answers

What does E22 mean on a Bosch Dishwasher?

The filter at the bottom of the dishwasher is clogged, which limits how well water circulates and drains.

Can I clear the E22 code myself?

Try these first: Remove the filter and wash it under running water with mild soap and a soft brush. Reinstall it so it locks in place. Scrape large food scraps off dishes before loading. Call a technician if a clean filter doesn't clear the code.

How much does it cost to fix a E22 code?

It depends on the cause. At FixPro the diagnostic visit is $79.00 and is credited in full to the repair; you get a flat-rate quote before any work starts.

Other Bosch Dishwasher codes

E09 · Heater faultE15 · Water in the base (leak protection)E24 · Not drainingE25 · Drain pump blockedE01 · Heat pump motor circuit faultE14 · Flow meter or fill problemE17 · Water inlet problemE18 · Not enough waterE21 · Circulation (heat) pump blockedE23 · Drain pump faultE27 · Low supply voltage

Still showing the code?

A FixPro technician will find the cause and give you a flat price. $79.00 diagnostic, credited toward the repair.

Book a repair →