Frigidaire Refrigerator · Code SY EF / 5Y EF

Frigidaire Refrigerator SY EF code: Evaporator fan fault

The refrigerator found a problem in the evaporator fan circuit. That fan moves cold air from the freezer coils through the fridge. Frigidaire says this code needs authorized service. You may notice the fridge warming up.

Most common causes

  1. Ice buildup blocking the fan blades
  2. Failed evaporator fan motor
  3. Loose or damaged fan wiring
  4. Control board fault

What you can safely check yourself

  1. Unplug the fridge for a few minutes, then plug it back in to see if the code clears.
  2. Make sure the doors seal fully and nothing blocks the air vents inside.
  3. Keep perishable food cold elsewhere if the fridge is warming up.

Unplug the appliance before moving or cleaning anything. Do not open panels, touch gas connections or bypass safety switches.

Checked against: searspartsdirect.com · appliancepartspros.com · partselect.com. Meanings can vary by model; check your owner’s manual.

Quick answers

What does SY EF mean on a Frigidaire Refrigerator?

The refrigerator found a problem in the evaporator fan circuit. That fan moves cold air from the freezer coils through the fridge. Frigidaire says this code needs authorized service. You may notice the fridge warming up.

Can I clear the SY EF code myself?

Try these first: Unplug the fridge for a few minutes, then plug it back in to see if the code clears. Make sure the doors seal fully and nothing blocks the air vents inside. Keep perishable food cold elsewhere if the fridge is warming up. Call a technician if the code returns. The fan and its wiring are behind the freezer panel, and ice buildup can point to a defrost problem too.

How much does it cost to fix a SY EF code?

It depends on the cause. At FixPro the diagnostic visit is $79.00 and is credited in full to the repair; you get a flat-rate quote before any work starts.

Other Frigidaire Refrigerator codes

DI SP · Ice jam in dispenserH · High temperature alarmOP · Temperature sensor faultPF · Power failureSY CE · Control communication error

Still showing the code?

A FixPro technician will find the cause and give you a flat price. $79.00 diagnostic, credited toward the repair.

Book a repair →