The codes people search for most, what each one means and what to check first. Tap a code for causes and step-by-step checks.
| Code | What it means |
|---|---|
| E18 F18 | Drain blocked The washer can't pump water out, usually because the drain hose or the pump is blocked or the hose is kinked. |
| E16 F16, E34, F34 | Door not locked The washer door didn't close or lock properly, so the cycle can't start. |
| E17 F17, F29 | Water supply problem Water isn't coming in fast enough, usually because of blocked inlet filters or low water pressure. |
| E23 F23 | Water in base (AquaStop) Water has been detected in the base of the washer, which means a leak, so the AquaStop protection has been activated. |
| E32 F32 | Unbalanced load The washer detected an imbalance in the drum and couldn't spin at full speed. |
| E33 F33 | Too much foam The washer detected too much detergent foam in the drum. |
$79.00 diagnostic, credited toward the repair. A 2-hour arrival window and a 90-day warranty.
Book a repair →