The codes people search for most, what each one means and what to check first. Tap a code for causes and step-by-step checks.
| Code | What it means |
|---|---|
| F3E0 F3, F4, F3E1, F3-1 | Oven temperature sensor fault The control has a problem reading the oven temperature sensor, the probe inside the oven cavity, or its wiring. The oven may not heat, may overheat, or may refuse to start bake or self-clean. On older two-digit displays F3 means the sensor reads open and F4 means it reads shorted. |
| F9E0 F9 | Power supply / wiring or door lock fault On current models F9 or F9E0 means the range sensed miswired power or unusual electrical noise on the supply line, often right after installation or a power outage. On some older models with two-digit codes, F9 instead points to a door lock problem. |
| F1E1 F1E0, F1 | Oven control board fault The electronic oven control failed an internal memory or self-check. The oven may not respond or may shut off. |
| F2E0 F2E1 | Keypad / touch panel fault The control detected a problem with the keypad or its connection, such as a key that reads as stuck or a disconnected ribbon cable. The oven may beep, ignore key presses or turn itself off. |
| F5 F5E0, F5E1 | Oven door latch fault The control is getting mismatched signals from the door latch or door switches, often around a self-clean cycle. The oven may refuse to bake or clean, and the door may stay locked. |
$79.00 diagnostic, credited toward the repair. A 2-hour arrival window and a 90-day warranty.
Book a repair →