Maytag Washer F7E5 code: Shifter fault (top-load)
On top-load washers, the control cannot confirm the position of the shifter, the part that switches the drive between agitating and spinning. The washer usually stops mid-cycle, often with water still in the tub.
Most common causes
- Worn or failed shift actuator
- Loose or damaged wiring between the control and the shifter
- Drive mechanism binding from an overloaded basket
- Control board fault
What you can safely check yourself
- Unplug the washer for 5 minutes, plug it back in and start a new cycle to see if the code clears.
- Reduce the load size and redistribute clothes before restarting.
Unplug the appliance before moving or cleaning anything. Do not open panels, touch gas connections or bypass safety switches.
Checked against: parts.alliancelaundry.com · producthelp.maytag.com. Meanings can vary by model; check your owner’s manual.