Maytag Dishwasher F1E1 code: Control module error
The dishwasher's main control detected a fault within itself, such as a stuck relay. The dishwasher may not start or may stop mid-cycle.
Most common causes
- Main control board fault
- Power surge
- Damaged wiring to a component the control drives
What you can safely check yourself
- Reset the control: unplug the dishwasher (or switch off its breaker if it is hard-wired) for 30 seconds, then restore power.
Unplug the appliance before moving or cleaning anything. Do not open panels, touch gas connections or bypass safety switches.
Checked against: producthelp.maytag.com · producthelp.whirlpool.com · searspartsdirect.com. Meanings can vary by model; check your owner’s manual.